Basic system drives for OEMs – not including fuses, contactor, etc.
 Model SLX50/122, up to 75hp
(Size 1) |
These drives are available as both single direction 2-quadrant (SL) and a full 4-quadrant, regenerative (SLX) drives in different builds up to 75hp. Like the other system drives available from Bardac, they are modern, sophisticated, high performance products designed for world wide markets.
A drive.web online system builder option (available May 2004) uses
Ethernet to enable these drives to be integrated into cost effective systems
of any size or complexity. The drive.web option can be easily added
retrospectively to any installation to provide improved functionality,
connectivity, diagnostics and Internet access.
These compact, high performance drives provide flexibility to OEMs who may need to use different power components to meet special user requirements. (Fuses, contactor, etc., would have to be fitted externally)
We also offer a completely digital DC drive in our PL/PLX Series.
| Model | 500VDC Arm | 240VDC Arm | Fuse Kit | Contactor | Line Reactor | Drive IsolationTransformer |
| SL & SLX15 | 20hp | 10hp | F3-30 + FA3-40 | DB53040 | LM37 | DIT27** |
| SL & SLX20 | 30hp | 13hp | F3-60 + FA3-60 | DB53040 | LM52 | DIT40** |
| SL & SLX40 | 60hp | 25hp | F3-100 + FA3-100 | DB51085 | LM120 | DIT75** |
| SL & SLX50 | 75hp | 35hp | F3-125 + FA3-125 | DB51105 | LM120 | DIT93** |
| Dimensions: 9.8″H x 8.0″W x 5.7″D (250 x 203 x 145 mm) ** Transformer specifications can be found on the Power Quality page |
||||||
Standard features:
- Field controller with automatic field weakening
- Heat sink thermostat protection
- Diagnostic test socket
- 50/60Hz autoranging
- Wide supply range 208-240 or 380-480 volts +/-10%
- Phase rotation insensitivity
- Phase loss protection
- Linear torque control
- Armature voltage or tach feedback
- Calibration range switches (no component change)
- Speed reference +/-10V or 4-20mA
- Speed trim input
- Maximum and minimum speed settings
- Adjustable up & down ramps with dual range
- Adjustable current limit
- Current range selectable for multiple horsepowers
- Torque control in either 2 or 4 quadrants
- 150% overload capacity with 30 second stall timer
- Relay outputs: Stall, Zero speed, Reverse, Overload
- Control fuses fitted (up to 75hp)
- Regen stop (SLX 4-quad. regen drive)
- Ramped stop
- Start inhibit after power loss
- LED indicators:
- Stall
- Stall Timer
- +/- Current
- Field Loss
- Tach Loss
- Peak Amps
- Ext. Trip
- Power On
- 25%, 50%, 95% Field Volts
- Speed signal output
- Current signal output
- Ramp & Total demand signal outputs
- Shunt wound or permanent magnet motors
- Stability adjustment
- Current reduction for low power test
Approvals: CE, CSA, UL
